POWER RESISTORS
Oval Edgewound High Current Power Resistors
| DOE
When lower resistance with higher power capacity is required, Use Token China's Edge-wound Power High Current design.
Designed in both Edge-wound and Round Wire patterns, these DOE resistors can handle 550 to 3250 Watts of power. Specify Token China's Edgewound design for very low resistance and high power capacity. Built to perform in rugged environments, DOE resistors are constructed of a heavy resistance alloy mounted on ceramic insulators, solid nickel terminals, and supported by special electroless nickel-plated solid copper terminals. These heavily plated and supports prevent oxidation at high operating temperatures and corrosion. Applications:
Wattage Rating:
Resistance Tolerance:
The power DOE resistor is lead-free and RoHS compliant. Please contact us for details with your specific needs. |
Specifications & Dimensions (Unit: mm) - High Current DOE
![]() |
| Power Rating | A (mm) | B (mm) | Resistance Value Range |
| 550W | 244.5 | 295 | 0R2~2R |
| 900W | 335 | 385.5 | |
| 1200W | 419 | 470 | |
| 1500W | 505 | 556 | |
| 1800W | 588 | 638 | |
| 3250W | 410 | 465 |
|
Performance Characteristics - High Current DOE
| TEST ITEM | TEST METHODS | CHARACTERISTICS |
| Resistance tolerance | JIS-C-5202 5-1 | Resistance Nominal Tolerance ±10%(K) |
| Temperature coefficient | JIS-C-5202 5-2 | ±300ppm/°C max. |
| Power rating load | JIS-C-5202 5-4 | R/R ≤ ±(1%+0.1Ω) Surface temperature up 350°C max. |
| Dielectric withstanding voltage | JIS-C-5202 5-7 2000VDC 1 minute Between terminal and anchor stand |
Free of appearance or structural irregularity ΔR/R ≤ ±(1%+0.1Ω) |
| Terminal strength | JIS-C-5202 6-1 500N 30 seconds | Free of appearance or structural irregularity |
| Insulation resistance | JIS-C-5202 5-6 500VDC | 100MΩ min |
| Short-term overload | JIS-C-5202 5-5 1000% rated power 5 seconds |
Free of appearance or structural irregularity ΔR/R ≤ ±(2%+0.1Ω) |
| Vibration | JIS-C-5202 6-3 490m/s2 11ms |
Free of appearance or structural irregularity Surface coating crack ΔR/R ≤ ±(2%+0.1Ω) |
| Remarks | Resistance and resistance tolerance were tested in-house with micro resistance meter. | |
How to Order - High Current DOE
| DOE | 1500W | 1R5 | K | F | |||||||||
|
|
|
|
|
|||||||||
